Please login first in order to start a new discussion.
Featured Topics
-
Do you supply pipe fitting according to draft like flange?
posted in Pipe fittingDitto, we want some bronze flanges for pipe, but it is not a normal standard.... -
Over 24 inch, what is the ansi/asme flange standard for valve and pipe?
posted in flangewhat are the ansi or asme flange starndards for valve and pipe over the size of 24 inches? are all gate valves flanges ansi 16.5 ? i come to know that for large NPS ,say, 24 inches over the flange is ansi 16.5 and for pipe it is ansi 16.47. why? why ... -
API 6A Classification of Flanges ?
posted in API 6A FlangeThere are three common types of API flanges: API 2000,3000,5000 and there are two high pressure series, API 10,000 and 15,000. The number of the series indicated corresponds to the maximum working pressure expressed in psi at a temperature of l00oF. -
Are your flanges domestic to the foreign imports?
posted in flangeAre your flanges domestic to the foreign imports? do you have a agent in the UAE ?...
Aron DAI 
-
Weld Neck flange bores
posted in flangeHere in the US, when ordering ANSI weld neck flanges the bore sizes must be specified with respect to pipe schedule sizes (SCH40, SCH80, etc.). When ordering ISO or DIN weld neck flanges do you do the same or is the bore always one size only? -
if 5000PSI, how convert to LB ?
posted in flangeAs we know 5000psi, it is about 34.5MPA, 800lb is about 13.75 MPA, so 5000psi=800LB/13.75MPAX34.5MPA=2007LB it is correct ?... -
-
what is the plate flange?
posted in flangewhat is the plate flange? what is the difference between flat flange and slip on flange ?... -
-
-
What should I consider for buying pipe fittings?
posted in flangeWhat should I consider for buying pipe fittings?... -
Do you provide Material Test Reports (MTR’s) with your shipments?
posted in Business Term FAQDo you provide Material Test Reports (MTR’s) with your shipments?... -
-
catalog for long welding neck flange 150lb
posted in lwn flangeDo you have a catalog for long welding neck flange 150lb?... -
Are pipe fittings having a visible line in them, are cracked?
posted in Pipe fittingNo. The noticeable line is not a crack. This you can test by trying to open the crack. If you are unable to open it up by pulling on the part then that is knit-line which is an intrinsic part of the injection-molding process. A knit-line will not imp... -
-
what is the height of LWN flange ?
posted in flangethe height of LWN flange usually include 228.6mm and 304. 8mm.... -
What is an RFSO or SORF flange?
posted in flangeAn RFSO / SORF flange is a raised face slip on flange. ... -
What type of Carbon Steel Should I specify for forged Flanges?
posted in flangeCarbon Steel flange specifies parameters for the carbon steel. The criteria given allows for Q235, SS400 A283, A36, A516-70, A105 etc, and A181-60 to be used. Limiting your spec to any of one of those can double or triple your costs. So for general p... -
What is the difference between Ser A and Ser B of ASME/ANSI B16.47 Flange?
posted in ansi flangeFirstly you should know the ANSI ASME B16.47 Ser.A is similar with ASME MSS SP44, Ser.B similar with API 605 Flange. The short answer is Series A tend to be larger, heavier, have fewer bolt holes, and cost more. The longer answer is these were compet...
- Page :
- 1
- Total Posts: 17
- Total Resolved Posts: 11
- Total Unanswered Posts: 10
- Total Users: 16
- Latest Member: carpinteyrouaj
- Online Users: 131 other guests
